PHENOLIC MICROBALOONS
For Epoxy resins ONLY
Please remember that our PHENOLIC MICROBALOONS come in a container marked in ounces and other units of measure. This is at least a $2.50 value by itself!
PHENOLIC MICROBALOONS are bulking agents that are microscopic hollow balloons that are brownish in color. They are a low density filler, and make epoxy resin lighter in weight , and thicker and less runny. It is not to be used for gluing.
PHENOLIC MICROBALOONS are best used for making low density fairing compounds. When added to epoxy resins, PHENOLIC MICROBALOONS have a strong weight to strength ratio. The result is easy to sand and shape.
?
To use:
- mix your resin and hardener, or catalyst
- next add your PHENOLIC MICROBALOONS
- it is best to use a paint mixer on your power drill to ensure that all of the PHENOLIC MICROBALOONS are properly saturated.
Thick layers and large pour areas can create excessive heat, so proceed with caution. Not recommended to be spread more that 1/8” thick
Read before using:
Caution:
Dry powder materials can build up static charges. Proper precautions must be taken in the presence of flammable liquids.
WARNING:
Can cause eye irritation, harmful if inhaled, may cause skin irritation. Harmful if swallowed.
Avoid contact with eyes, and contact with skin. Wear goggles and face shield when handling. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat , spark and flame. Store handle and use in a manner that minimizes dust generation.
First aid:
In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment .. If you have breathing difficulties seek immediate medical attention
Attention: container may be hazardous when empty. Empty containers contain product residue.
If you would like the MSDS sheet, e-mail your request ( after purchase) to
KEEP OUT OF REACH OF CHILDREN !!! imediately flush with water for 15 minutes. If irritation continues seek medical
FiberglassSite@comcast.net , and it will be sent you in a PDF file , or in any manner that you request.