.67 gallon kit, 1/2 gallon resin, 22 ounces hardener for a total of 86 ounces , or .67 gallons
VIDEO LINK = HOW TO MIX EPOXY RESIN === https://www.youtube.com/watch?v=xfY5A7xH7io
(we also have a 1.3, and a 4 gallon kit )
This is premium FS-A23 Laminating Epoxy at an excellent price!
This resin is made for us by the largest resin maker in the USA. It is 20% stronger than any name brand epoxy resin you would buy off of the shelf in a boat supply store, and we bring it to you at a price you just can't beat. Many of our commercial customers have tried our epoxy resin, an now it is all they use. Try it once, and it will be your go to resin!
FS-A23 is designed to be used for : General purpose laminating -Marine coatings, and VOC maintenance ; Chemical resistant tank linings; fiber reinforced pipes, tanks, and composites ; molding compounds; Construction , Electrical , and Aerospace adhesives
FS-A23 Is a medium cure, low viscosity, undiluted, difunctional epoxy resin. It has Very good mechanical, adhesive , chemical, and electrical properties.. It has Low viscosity, low color, a good balance of mechanical and electrical properties, and excellent chemical resistance.
It is stronger than most off the shelf epoxy resins, and has the added advantage of being chemically resistant!
Viscosity @ 25°C (77°F) 2200cps
Mixed System Properties:
Density At 25 C 9.9 lbs per gallon
VOC 0 grams per liter/
density 9.9 pounds per gallon
(heat deflection temp 212 F )
Mix ratio by weight resin/hardener 100/27
Hardener Viscosity @ 25°C (77°F) 350-450
Mix ratio by volume resin/hardener 3/1
Gel time, working time @ 77°f 30 min.
Tack free time @ 77°f 8-12 hours
Mixing Ratios for 3 : 1 mix :RESIN - HARDENER
Typical Cured Properties:
Tensile Strength, psi (ASTM D638) 11,800
Tensile Elongation (ASTM D638) 7.5%
Tensile Modulus, psi (ASTM D638) 470,000
Flexural modulus psi (atsm ) 440,000
Flexural Strength, psi (ASTM D790) 17,600
THIS IS VERY HIGH QUALITY RESIN AT A GREAT PRICE, YOU WILL NOT BE DISAPPOINTED
14 Reviews Hide Reviews Show Reviews
good stuff works perfect
I used this product during the replacement of a portion of my boat deck. What's nice about the product is the working time you get, verse that of other resins. It is also stronger and designed for boat repairs. I'm handy but a novice when it comes to fiber glassing so the video's offered were an added benefit. I'll probably find other uses for this product, especially outdoor projects.
Used this product to repair 2 whirlpool bathtubs where the jets were broken loose from the fiberglass. Worked great. The repair was stronger than the original factory installation. Mike is a great guy to work with.
We found the product real easy to use and had great results repairing walkboards.
Product is excellent. I like West System, but will now purchase this instead, due to cost. (I want to try the premeasured pumps). Call in support is excellent always there. Note: Pour your resin first, as you get more hardner than required.)