.67 gallon kit, 1/2 gallon resin, 22 ounces hardener for a total of 86 ounces , or .67 gallons
VIDEO LINK = HOW TO MIX EPOXY RESIN === https://www.youtube.com/watch?v=xfY5A7xH7io
(we also have a 1.3, and a 4 gallon kit )
This is premium FS-A23 Laminating Epoxy at an excellent price!
This resin is made for us by the largest resin maker in the USA. It is 20% stronger than any name brand epoxy resin you would buy off of the shelf in a boat supply store, and we bring it to you at a price you just can't beat. Many of our commercial customers have tried our epoxy resin, an now it is all they use. Try it once, and it will be your go to resin!
FS-A23 is designed to be used for : General purpose laminating -Marine coatings, and VOC maintenance ; Chemical resistant tank linings; fiber reinforced pipes, tanks, and composites ; molding compounds; Construction , Electrical , and Aerospace adhesives
FS-A23 Is a medium cure, low viscosity, undiluted, difunctional epoxy resin. It has Very good mechanical, adhesive , chemical, and electrical properties.. It has Low viscosity, low color, a good balance of mechanical and electrical properties, and excellent chemical resistance.
It is stronger than most off the shelf epoxy resins, and has the added advantage of being chemically resistant!
Resin Properties:
Viscosity @ 25°C (77°F) 2200cps
Mixed System Properties:
Density At 25 C 9.9 lbs per gallon
VOC 0 grams per liter/
density 9.9 pounds per gallon
(Color -amber)
(heat deflection temp 212 F )
Mix ratio by weight resin/hardener 100/27
Hardener Viscosity @ 25°C (77°F) 350-450
Mix ratio by volume resin/hardener 3/1
Gel time, working time @ 77°f 30 min.
Tack free time @ 77°f 8-12 hours
Mixing Ratios for 3 : 1 mix :RESIN - HARDENER
Typical Cured Properties:
Tensile Strength, psi (ASTM D638) 11,800
Tensile Elongation (ASTM D638) 7.5%
Tensile Modulus, psi (ASTM D638) 470,000
Flexural modulus psi (atsm ) 440,000
Flexural Strength, psi (ASTM D790) 17,600
THIS IS VERY HIGH QUALITY RESIN AT A GREAT PRICE, YOU WILL NOT BE DISAPPOINTED
14 Reviews Hide Reviews Show Reviews
-
FS-A23 / FS-B412 Epoxy resin and hardener
Working on a project boat and have used Totalboat product and others but they do not compare to the Epoxy system from Fiberglasssite. Compared to others, Flash/cook time is nominal so I can keep on building in minutes since it doesn't take long to set like concrete.
-
Great Stuff
Very high quality epoxy resin and hardener combo. Did several boat repairs and they all turned out great. No unexpected flash-off, and it hardened on a predictable schedule. Cannot beat this for the price
-
My 1st choice
Their products are the finest quality, their service is top notch and their advice is invaluable.
-
1st Time User
Great product and great customer service.
-
Great product
I found the perfect repair product for a shower base that was squeeking after de laminating from the morter bed. Thank you Mike for your knowledge and help!
-
Great product, Blush takes a good deal of effort to get off. Fills weave with less resin
I think it is a very tough resin. Fills the weave nicely. Seems one fill coat applied with a squege and foam roller will fill the weave nicely. A thin coat applied this way leaves little chance for runs. Really needs to be wet sanded as dry sanding clogs paper quickly. Also, no need to use course paper. Flat sand with 100 or 120 grit., wet or dry paper. The blush is sticky. It takes hot soapy water and effort to remove blush. Supplier is great to work with also. I build kayaks. For small batches, celebrate by pourin 3 equal amounts in mixing container and mark the height on the cup, add the 4th equal amount of water and mark the container. Fill cup to first mark with resin then add hardner to the 4th mark and mix for 2 minutes. Just know the blush is very sticky. I think even after washing blush with hot water what is left clogs dry sanding.
-
Works great. Didn't notice any overcoming smell
Unfamiliar with your epoxy. I had minor chemical booboo to much exothermal heat? Or reaction with plastic but it melted the bottom out of mixing cup. No big deal was almost done anyway oops. Other than that it was great, good set up time, wet out good. No complaints.
-
FS-A23 Epoxy - Great stuff
What can i say but very nice epoxy. As is all the products that I've purchased from them. And customer service is excellent. Shipping is always blazing fast. Might I also suggest watching their very informative videos.
-
Great product & service
Excellent service, they are always trying to save you money, no problem at all with the product. Products on their website very informative.