1.3 gallon kit, 1 gallon resin, + 1/3 gallon hardener for a total of = 1.3 gallons
VIDEO LINK = HOW TO MIX EPOXY RESIN == https://www.youtube.com/watch?v=xfY5A7xH7io
(we also have a 4 epoxy resin gallon kit)
This is premium FS-A23 Laminating Epoxy at an excellent price!
This resin is made for us by the largest resin maker in the USA. It is 20% stronger than any name brand epoxy resin you would buy off of the shelf in a boat supply store, and we bring it to you at a price you just can't beat. Many of our commercial customers have tried our liquid epoxy resin, an now it is all they use. Try it once, and it will be your go to resin!
FS-A23 is designed to be used for : General purpose laminating -Marine coatings, and VOC maintenance ; Chemical resistant tank linings; fiber reinforced pipes, tanks, and composites ; molding compounds; Construction , Electrical , and Aerospace adhesives
FS-A23 Is a medium cure, low viscosity, undiluted, difunctional laminating epoxy resin. It has Very good mechanical, adhesive , chemical, and electrical properties.. It has Low viscosity, low color, a good balance of mechanical and electrical properties, and excellent chemical resistance.
It is stronger than most off the shelf epoxy resins, and has the added advantage of being chemically resistant!
Resin Properties:
Viscosity @ 25°C (77°F) 2200cps
Mixed System Properties:
Density At 25 C 9.9 lbs per gallon
VOC 0 grams per liter/
density 9.9 pounds per gallon
(Color -amber)
(heat deflection temp 212 F )
Mix ratio by weight resin/hardener 100/27
Hardener Viscosity @ 25°C (77°F) 350-450
Mix ratio by volume resin/hardener 3/1
Gel time, working time @ 77°f 30 min.
Tack free time @ 77°f 8-12 hours
Mixing Ratios for 3 : 1 mix :RESIN - HARDENER
Typical Cured Properties:
Tensile Strength, psi (ASTM D638) 11,800
Tensile Elongation (ASTM D638) 7.5%
Tensile Modulus, psi (ASTM D638) 470,000
Flexural modulus psi (atsm ) 440,000
Flexural Strength, psi (ASTM D790) 17,600
THIS IS VERY HIGH QUALITY RESIN AT A GREAT PRICE, YOU WILL NOT BE DISAPPOINTED
12 Reviews Hide Reviews Show Reviews
-
very nice epoxy
This stuff is great. Very low odor, nice working time and tough as nails after cure.
-
I like to use this resin for building body panel molds. I use these molds to build carbon fiber body parts using a vacuum bagging injection method.
This product is very for giving when mixing and doing layup.
-
great epoxy at 77 degrees
"Gel time, working time @ 77°f 30 min." however, it is 15 minutes at 80 and 5 minutes at 90 degrees . I live in Florida and the only way I can work with this resin is to get out poured out of the mixing cup by 2 minutes and spread it out, a 1/4" in the cup will exotherm in 10 minutes. i may have to air condition my shop to work with it. in other words , it is FAST resin