32" WIDE 10 YDS LONG
Blow out sale, use this product and save big $ on any project !!!
The standard 17 oz double Bias fiberglass cloth. (+/- 45) degree total weight 17.92 oz per sq yd or 600 g per sq meter
The cloth helps to bulk up on strength without requiring multiple layers, and it impregnates easily. The weave is retained by a thin polyester stitching which holds the perpendicular 45 deg tows in place without affecting structural integrity.
Experience fantastic results while used during wet lay-up, vacuum bagging, or infusion.
Because it is stitched at a 45 degree angle it can go around a 90 degree angle.
This makes it excellent for stringers or for any application that has tight corners.
it will accept any resin , polyester, epoxy vynal ester.
we sell it in rolls 5, 10 ,15 ,20 ,25 , 50 100, up to 130 yds long
We go it an an excellent price and are passing the saving on to you
9 Reviews Hide Reviews Show Reviews
-
High quaility
I've bought 2 rolls of this, and it's very good. Very consistent, no gaps in the layers, and high quality. The threads are a little larger than other 1700 cloth I've seen, and it's tightly bound, so it probably doesn't conform to sharp complex curves as well, but it's great flat or single axis curves. Great packaging and shipping from FiberglassSite!
-
We’ll worth saving a few bucks
Quick shipping packaged to hang up and start use Nice stuff used 30 yards so far just ordered another 20 yards Less waste for my project cause of the narrow width Wets our nice with polyester resin and is very strong One layer stiffened up the side of my boat a lot
-
Well packaged, good stuff
I'm not a pro. Shipped on time, well packaged. This stuff is absorbant so buy a little extra resin (or call and ask for their recommendation and go high if you're new to fiberglassing). When doing multiple sheets I put them on trash-bag wrapped plywood, rolled it on top then layered on the board. and rolled the top again Then picked it up and slapped it on the vertical wall. Worked great, very heavy product. I cut using tin snips and had a few loose strings.
-
Great product at a great price.
I'm only on my second part of my first ever fiberglass project. My initial impression of the biaxial mat is, it's a fantastic product. Just the feel and thickness of the mat is so far above and beyond the off the shelf product. Still in the early stages of the project. I'll try to give further impressions when I'm finished.
-
1700 mat
Cloth is nice and heavy. Lays out very well. Adds nice strength to the boat floor.
-
More than expected
It nice for a change to get what you pay for and a little more excellent product, perfect for mold making. Very pleased thank you.
-
Great quality.
Easy to work with, handles 90° angles well and strong. I also am very impressed in fiberglasssite.com and their customer service. Within 10 minutes my order was processed, and within 20 minutes it was being shipped. Though the shipment was delayed because of weather, I was notified as to the new arrival date, (next day) I know this was more than likely the shipping company, however they usually aren't as good as they were in notifications as they were with this shipment. Curious to know if it is a deal worked out with fiberglasssite.com. I will be purchasing a lot from you from now on.
-
Quality on par with any and great value
Quality was as good as any I have seen. Price is far better than any place else. Packaging was solid. I've ordered this several times
-
30" 1700 mat
Well packaged for mailing, clean and in good condition.
